CONCENTRATED
ALL YEAR PROTECTION.
An advanced concentrated antifreeze and engine coolant, suitable for all year round use
DRIVETEC BLUE ANTIFREEZE & COOLANT
- Methanol free formulation
- Suitable for all engine types
- A robust two year service life
- Contains anti-corrosion additives
- Conforms to: BS6580:2010
DRIVETEC RED ANTIFREEZE & COOLANT
- Methanol free formulation
- Organic Acid Technology (OAT)
- Suitable for all engine types
- Contains anti-corrosion additives
- A robust five year service life
- Conforms to: BS6580:2010
- Meets the performance requirements of: Audi, Volkswagen Seat TL774-D, Ford WSS-M97B44-D, Jaguar WSS-M97B44-D, MB 325.3, Saab 6901599, Skoda 61-0-0257, Vauxhall QL 130100.
DRIVETEC PURPLE ANTIFREEZE & COOLANT
- Methanol free formulation
- Silicated Organic Acid Technology (Si-OAT).
- Suitable for all engine types
- Contains anti-corrosion additives
- A robust five year service life
- Conforms to: BS6580:2010
- Meets the performance requirements of: Audi TL774-G, Bentley TL774-G, Bugati TL774-G, Seat TL774-G, Skoda TL774-G, VW TL774-G, Porsche (1997 onwards), MAN from 12/2011 (MAN 324 Type Si-OAT), Mercedes Benz trucks from 10/2011 Specification 325.5
PROTECTION LEVELS.
| Dilution Ratio | Driving Conditions |
|---|---|
| 1:1 AF:Water | Normal Conditions |
| 2:1 AF:Water | Winter (-30 °C) |
| 1:0 AF:Water (Neat) | Extreme (-66 °C) |
THE RANGE.
| PART NO. | TYPE | SIZE |
|---|---|---|
| DRCF1LB | BLUE | 1L |
| DRCF5LB | BLUE | 5L |
| DRCF20LB | BLUE | 20L |
| DRCF199LB | BLUE | 199L |
| DRCF1LR | RED | 1L |
| DRCF5LR | RED | 5L |
| DRCF20LR | RED | 20L |
| DRCF199LR | RED | 199L |
| DRCF1LP | PURPLE | 1L |
| DRCF5LP | PURPLE | 5L |
| DRCF20LP | PURPLE | 20L |
| DRCF199LP | PURPLE | 199L |
DIRECTIONS FOR USE
- Drain and flush the cooling system with water.
- Check all hoses, clips and joints for leakage and tighten or replace where necessary.
- Refer to vehicle manufacturer’s handbook for total volume of the cooling system.
- Remove radiator cap and pour 1.5 liters of clean water coolant.
- Add antifreeze to a volume equal to the required v/v solution of the coolant system capacity (depending on protection desired.)
- Top up with clean water to recommended fill level.
- Replace cap and run engine until it reaches normal operating temperature to remove any air locks.
- Switch off engine and allow to cool.
- Remove radiator cap and top up with water if necessary and replace cap.Always consult the Manufacturers handbook.
HANDLING
